Types of malfunctions of garage doors and their repair

The operation of sliding gates involves constant opening and closing of the sashes. Such work inevitably leads to the wear of individual mechanisms and the entire structure as a whole. The service life of the product can be increased by proper care and regular maintenance. But even with this approach, it is impossible to eliminate gate breakdowns.

The service life of structures, in addition to the natural wear of components, is affected by climatic factors, constant changes in temperature and humidity, and precipitation. It is recommended to periodically test the condition of the structure units and not allow them to break down to critical levels. It will not be possible to eliminate a serious defect on your own; you will need to involve qualified specialists in Garage Door Repair in Dubai.

The main reasons for the failure of sliding structures

High-quality operation of sliding gates is possible only if they are in full working order. Any defect hinders the functioning of the structure or completely disables it. The most common reasons for breakdowns of sliding gates are:

• Natural wear and tear of individual structural elements, after which the operation of the product becomes difficult or impossible;
• Errors in using the gate, which gradually lead to serious breakdowns and inoperability of the product;
• If the door leaf, sliding mechanism, or electric drive were subjected to mechanical loads, the consequences may be unpredictable.
• One of the most common reasons for contacting the service is errors made during the installation of structures and improper maintenance of already installed gates.

In most cases, the breakdown can be detected at an early stage, and appropriate measures can be taken to eliminate the defect. If the cause of the gate malfunction is not found in time, more serious and expensive repairs will be required. It is quite difficult to identify several standard causes of breakdowns. Most often, situations are individual, and the solutions to problems differ.

The main reasons for automation failure

If the design is made qualitatively and regularly serviced, mechanical breakdowns can be avoided during a long period of operation. However, during use, malfunctions in the operation of the automation may be recorded. The main reasons are as follows:

• At low negative temperatures, failures in the operation of the electric drive are recorded, after which the sash stops moving.
• Over time, the lubricating compound in the automatic control unit may dry out or freeze. In such situations, the owner hears extraneous sounds and creaks, and incorrect movement of the web is recorded.
• Another reason is damage to the control unit, for example, mechanical impact, board failure, or other defects. The option of replacing the damaged element is the only way to solve the problem.

Most of these problems can be solved with the help of specialists. The technician will quickly identify the cause of the defect and offer various options for its elimination.

Basic actions to take when a gate breaks down

The situation in which the gate does not close can be caused by various reasons. Most often, photocells fail or switches at the ends of the system break. Sometimes the control unit fails, and the support rollers of the structure get defective. A thorough inspection of the system can reveal the cause of the defect and eliminate it with the help of qualified specialists.

If the gate does not close completely, most likely the electric drive is out of order, the support rollers, the supporting beam, or the base are damaged. The reason may also be a breakage of the main gear, a change in the position of the toothed rack. After checking the mechanisms, the Garage door remote Dubai experts decide on the possibility of repair or replacement of the elements.

Dirt and debris getting into the roller bearings causes them to break. Photocells and signal lights may also fail. In some cases, oxidation of power contacts is recorded. Repairs in such situations are also possible. This will require the involvement of qualified technicians.